4 thích 0 k thích
9.3k đã xem

給予一個數列,請寫一個程式找出其中最大的數,最小的數,以及出現最多次的數。

 

輸入說明:

一開始會先輸入一個正整數N,N不會超過1000,接下來的N個正整數就是要處理的數列。

 

輸出說明:

請依序輸出三個數,分別代表最大的數,最小的數,出現最多次的數。如果出現最多次的數不只一個,請輸出其中最大的那個。

 

輸入範例:

5
1 1 2 2 3

 

輸出範例

3 1 2
[Exam] đã hỏi trong 2017-1 程式設計(一)AD bởi (30k điểm)
ID: 38940 - Xem được từ: 2017-12-23 09:00 - Hiệu lực đến: 2017-12-23 12:10
| 9.3k đã xem

16 Trả lời

0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
** * *** ** **** ** * ** * * ** ** * * ** *
* * *** * ***** arr[x],amount[x];
** * ** * *** ** *** i;
* * * * * * * * * *** ** * * * ***
*** * ** * * * ** *** * ***** * * *** ** * *** * ** * ** *
* ** ** ** ** * *** * ****
    int j;
** * * ** ** ** ** **
    {
* *** ** * * * * ** * *** * ** * ** * ********
*** ****** ***** ** ** *** * ** ** ** ** **** **** * * * * **
** * * * *** **** *** ** * ** * ** ** ** * *** * *
*** * ** * * ** ****** *** ** ********* * ** * ** ** ** ** ** *
    }
* * *** * ** * *** * * * * * * **
    {
**** ** * * * * * ** *** ** * ** ***** ** **** *** **
**** * * **** * * * * **** * * ** ** * *
** ** *** * ** * **** *** * *** ** ***** ** * *** * ** * ** ** *** * **** ******
** * ** ** ** * ** ** * ** *** * * * * * **** ** * * *** * ** * * * * * ** * ******** *
* ***** *** ** * **** * ** * ** * ** *
    }
    int temp=0;
* *** * ** * * ** * * * **** * *
    {
* *** ** ** * ****** **** *** ** *** *** ** ** *** ** * * ** * * ** ** **
**** * * * ** * *** * * ** ** * *** *
* * ***** ** ******* ** * *** ** ** *** * * ** ** * * * ** * * * *
** * * * * * ** *** * ** **** * *** *** * *** * * *** * * * *
** * **** ** ** ** * * ** ** * ** **
    }
* ** * *** * * ** **** ** * ******** %d %d\n",max,min,arr[size]);
** *********** * ** * ** 0;
}
trả lời bởi (160 điểm)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
include<stdio.h>

int main()
{
*** * *** * * ** *** * n,max=0,min=0;
* **** * * * * * ** ** num=0,temp=0;
* ********* * * * *** *** **** ***
***** * ** ** * * arr[1000],amount[1000];
** * ** * * **** * * ** i;
** * * * ** * * **** * * ** ** * * * **
* * **** * **** * ** *** * *** * **** * * ****** * *** *** * **
* *** ****** * * * ** ***
** ** ** ** ** * j;
    
* * * *** * * * *** ** * * * *** ***
    {
*** *** * ** * ** * * ** * * ** ***** **** *** * ****
** * *** * * * *** * * ***** *** ** * * ** *** ** * * ** ***
* *** ** * * ** ** * * * ** ** * ** **** * ** ** ** * * **
** * ** * * *** ** ** *** * * * *** * ** * * * * * *** * * **** ** *
    }
** ** ** **** * *** * *** * ***
    {
*** *** * *** * ** ******* ** * * * ***** ***
*** * ** ** ***** * * ** * *** *
** ** ** * * * *** ** * * * * * **** * **** ** *** * * ** * *
*** ***** * * ** * *** * ** * * **** * ** *** ** ** * ** * * * * ** ** **** * **
* * * ** *** ** * ** ***** **** * * * * * *
*** * * **** **** ****
   
    
**** * ** * ** * ** * ***
    
    {
* * ** * * ** * ** * * * * * * * * ******* * ** *** ** ** ****** *** * ** *** * *
* **** * * * ** **** * ** **** ****
** *** * * * * * * *** *********** * * * ** * ** * * ** * * **** ** *
*** * **** * *** ** * ** * * *** * ** * * ** * ** * ** * * ** ********
* * * * * ** * * * * * ***** * ****** *** * *
    }
** * * * * * * %d %d\n",max,min,arr[num]);
* * * * * *** * * * * 0;
    
}
trả lời bởi (174 điểm)
đã sửa bởi
0 0
prog.c: In function 'main':
prog.c:11:18: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'int' [-Wformat=]
          scanf("%d",arr[j]);
                  ^
prog.c:13:8: error: 'max_length' undeclared (first use in this function)
     if(max_length<current_length)
        ^~~~~~~~~~
prog.c:13:8: note: each undeclared identifier is reported only once for each function it appears in
prog.c:13:19: error: 'current_length' undeclared (first use in this function)
     if(max_length<current_length)
                   ^~~~~~~~~~~~~~
prog.c:18:20: error: expected expression before '{' token
     current_length={0};
                    ^
prog.c:22:36: error: 'n' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                    ^
prog.c:22:41: error: 'max_lenhth_num' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                         ^~~~~~~~~~~~~~
prog.c:22:55: error: expected ')' before ']' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                       ^
prog.c:22:55: error: expected ';' before ']' token
prog.c:22:55: error: expected statement before ']' token
prog.c:22:56: error: expected statement before ')' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                        ^
0 0
prog.c: In function 'main':
prog.c:11:18: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'int' [-Wformat=]
          scanf("%d",arr[j]);
                  ^
prog.c:13:8: error: 'max_length' undeclared (first use in this function)
     if(max_length<current_length)
        ^~~~~~~~~~
prog.c:13:8: note: each undeclared identifier is reported only once for each function it appears in
prog.c:13:19: error: 'current_length' undeclared (first use in this function)
     if(max_length<current_length)
                   ^~~~~~~~~~~~~~
prog.c:18:20: error: expected expression before '{' token
     current_length={0};
                    ^
prog.c:22:36: error: 'n' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                    ^
prog.c:22:41: error: 'max_lenhth_num' undeclared (first use in this function)
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                         ^~~~~~~~~~~~~~
prog.c:22:55: error: expected ')' before ']' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                       ^
prog.c:22:55: error: expected ';' before ']' token
prog.c:22:55: error: expected statement before ']' token
prog.c:22:56: error: expected statement before ')' token
     printf("%d %d %d\n",arr[0],arr[n-1],max_lenhth_num])
                                                        ^
0 0
Case 0: Wrong output
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 0
prog.c:1:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token
 include<stdio.h>
        ^
0 thích 0 k thích
Hidden content!
#include<stdio.h>

int main()
{
    int temp,n,most,mostt=0,big,small;
    int i,j;
    
* * *** * ** * ******** *** * * ** ** * * ***
    
    int input[1000]={0};
    
** ** * * ******* ** * * *** ********
*** * *** * * * * **** ** * **** ** * *** **
    
** * ** *** * ** * * ** ** **
    {
** *** ** *** ** ** * ** * * **** *** * ** * *** ** * * * ** ***** ** * *** * ****** * * * ** *** t=0;
** ** * * ** * * *** *** ** * * ** ***** ***** *** * * ** * * ** ** * ** * ** * **** ** * * *** * ** * * ******
* ** * * ******* ** * * * * ** ** *** *** *** * * ** * ** * *** **** *** ** * * ** *** *** ** * * ****** **** *
** *** ** * ** * * * * *** * * *** * * * * ** ***** ** **** * * * *** * * * ** * ** * *** **** * * * ** * * * * *** ** * * * ** * *** * ** ***** ** * ** * * ** ** ** ***** ** ***
** ** ** *** **** ** * * ** * ***** ***** ** *** * **** ** * ** * ********* * * * **** ** * * *** **** ** ** * ** *** * * * * * * * * ** * ***** * * ** * * * ** * *** ** **** **
****** * * * ***** * * * * * * * ** *** * * * ** * *** * ***** *** ** **** ** * *** * *
** *** ** * ** * ***** ** ****** ** * * ****** * * **** ** ****** *** * * ** * * * * * *** ** ***** * * && most<input[i])
** * ** * ****** * * * ** ** ** *** ** ** **** ** * ** ** *** * *** * ** **** * * * **** ** * * * * *
* ** * * * ** ***** * * *** ** * * * *** ** * **** * * ** **** * * * ** ** ** ** *** * ** * **** *********** * * * * *** *** * **** ** * ******** *** **** * * ** * *** *** **** ** *** ***
* ********* * *** **** * **** *** * ** * * *** * * ** ** ** * ** **** * * ***** *** * ** ** * * *** * *** * * * ** ******* * * * ** * * *** * * ** * * ** *
* *** * ** * * ** * * * **** * * * * * **** * * * * * *** *** **** ** ** ** *** * *******
    }
    
******** * * *** ****
** ** * *** * ** ** **
    {
** * * ** ** ** * * * **** * * * *** * * ** * * * ** * ** ** * **** ** * ** * ** ** *** * * **** * * *
* ** *** * * **** *** * * * * ** *** ****** *** ** ** * * * * * * * * * ** * *** * *** ****** * * *** * ** *
    }
    
* * * * * * ** *** ** *
** ** * * * * ******* * ** * *
    {
*** * * * * ** * *** ** ** * ** *** ** *** * **** * *** ** * * * *** ******* *** *** * * * * * *** ** * * * ** * * ****
* ** * * ** * * * ** ** * *** *** * * * ******* * ** * *** * *** ** * ** * * ***** * * * * * ***** * ** *****
    }
    
** * * **** * * * ***** * **** %d %d\n",big,small,most);
    
    return 0;
    
}
trả lời bởi (215 điểm)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
* ** * * ** *** *** **** *** ** *** *****
******* **** * * arr[x],amount[x];
* ** ** * * ** * ** * * i;
*** * * ** * *** * * * ***** **** * *
*** **** * * * ***** * ** * ** ** * * *** * ***** * *****
* * * *** ** * * * *** * * * * **
    int j;
* * * * ** * ** * ** * ***
    {
* ** * ** **** ** * ** * ** * ** ** * * ** ** *
* * * * **** * * * **** ** **** * * * ******** ***** * *** * *** **
* * * ** *** *** ** ***** * *** *** *** *
* ** * * ******* ******* *** **** *** *** *** ** * * * * * * *** **
    }
*** ******* **** * *** * ** ** ***
    {
* ** * * * * *** * ***** ** * * ** * * * ** *** * **
*** * *** **** *** * ** * * * * *** *** **
* * * ** ** ** ***** * * * ** * * ** * * * * ** **** *
**** * * * ** * ** * **** * ***** ** * * * *** *** ** * * ** *** * *** * *** *
*** *** *** ***** * ***** *** * * * **** ***
    }
    int temp=0;
* ** **** ***** * ******** * *
    {
***** * *** * *** *** ***** * ** *** * ***** * **** * ** ** **** * * *** *
*** * * * * ** * * ***** ** * ** ****
*** * *** ** ** *** * *** *** * * * * ** *** **** ** * *** *** * ***
* ******* * **** ** *** **** * ** ** * * * *** * **** ** * * ***
** * * *** ** * **** * * ** * *** * *** ****
    }
** * * * ***** ****** * ** * * %d %d\n",max,min,arr[size]);
*** * * * ****** * * *** 0;
}
trả lời bởi (100 điểm)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
* * * *** ** ** ** ** n, current_num, current_num_length, max_length = 0, max_length_num, temp;
* ** ** *** * ** * i, j, k;
* *** * ****** * * * * arr[1000];
** * ** ** ** ** * * * ** ** * *
    
***** **** * * ******** ** * * ** = 0;i<n;i ++)
    {
** ** ********** * * ******* * * ** *** ******* *** * ** * **
***** * *** * **** **** * * * * ***** * ** = i+1;j<n-1;j++)
* ***** * ** ****** * * * ** * *****
*** ** *** * * * * *** * * * **** * ** * * * * *** > arr[i])
* *** * ** ** *** *** **** * * **** * * * * **** *   
* ** *** ** *** ** * ** * *** ***** * * * * ** * * * ** ** ***** * * ** ** =  arr[j];
* ****** * * * ** * * * **** * ** * *** ** * *** ** **** * ** ** ** *** = arr[i];
** * *** * *** * * **** * ** *** * * * *** **** * * * ** ** ** *** ****** * = temp;
* ** * *** * ***** * * * * * * ** * * ** ** ***** *****   
* ** * ******* *** *** * * ** *** * ** * *
    }
    
* * * * * * ** **** * * * * = arr[0];
** * * **** *** *** * * = 1;
** * ** ** * *** *** ** *** * ***
* * *** ** *** * *** ** * = 1;k<n-1;k++)
*** * * ** *** ** ********
***** *** ** * * * * *** ** *** * * = arr[k])
* **** * ******** ** *** * * *** * *
**** * ***** ** ***** * ** * * ** * *** *** ** ** * ** ++;
* *** ** * ** * * * * * * * ** ****
* * * * ** * ** * * * ** *** *****
* * * ** *********** * * *** ** ** ** ** ** * *** * *** ** * = 1;
* * ** * * * ** ** ** ** *** * ** * * * * **** **** ** * * * > max_length)
* * ** * *** ** ** * * ** * *** **
** ** *** ** * * **** ** * * * ** * = current_num_length;
* ** ****** * * ******* ** * * * *** * = current_num;
* ***** * * *** * * ** *** * * * ** * *** * * * * ***** * * *** * **
******* * *** * ***** * ** * * * ** * *
* *** *** ** *** *** *
** * * ** ******** **** *** * %d ** *** * * ** * * *** ** ** *     
    
* *** * * * * ** ** * * 0;
}
trả lời bởi (212 điểm)
0 0
Case 0: Wrong output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
* ** ** ** * * **** * *** ******** * * * * *** **
*** * * *** * ** ***** * arr[x],amount[x];
**** ****** * * * i;
** * ****** * * ** *** *
** * * *** * * ** *** * * *** * * *** * * *** * * * *
* * ***** * **** * * * ** *
    int j;
* ** * * * * ** * * * *
    {
* ** ***** ** * * **** * ****** *** ***** * ****
** ** **** * * * *** ** **** * * * * *** * * ** **** *** ** ** * ** *
* ** * * ** * ***** ****** * ** * **** ** * *
**** * * * **** * ** * *** * * ** **** * * * * * * ** * **
    }
* ** *** *** ***** * ** *** ** * * *
    {
** ** *** ** *** * * *** * * ** ** *** * **** * *
*** ** * ** * *** * ***** *** * **********
*** *** * * * * * * **** *** ** * ** * ** * * ** ** * *** *** *** * *
* * ** * ** ** * * *** *** ** ***** *** ** * * *** * **** ** ** ** **** * * ** *** *** ***** * * * *
** ** ** *** ** * * ** * * * ** * ** ** ** ***
    }
    int temp=0;
** ** *** * * * *** * * * *
    {
** *** * * * ** ** ** ****** * * **** *** * * * *** * ***** * * * ***** ** *
** *** **** * * ** * * ****** * * * ** *** * *
** * * ** * ** ** ** * ** ** * * * **** ** ** **** ** * * *** * * * * *
* ** * ** ** * *** * * * *** ** *********** * ** ** * *** **** * * * * *
* * ** * *** ****** ** * ** * * *
    }
****** * *** ** ********** * %d %d\n",max,min,arr[size]);
* *** * ** * ** *** ** * 0;
}
trả lời bởi (190 điểm)
đã sửa bởi
0 0
Case 0: Wrong output
0 0
Case 0: Wrong output
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>

int main()
{
    int temp,n,most,mostt=0,big,small;
    int i,j;
* * ** *** ** ** * * **** *** ** * *** * * *** *
    int input[1000]={0};
* * ******** * ***** ** * *** ***
* ****** * ****** **** **** ** * ** * ** **** ** ** ** * * *** * * * ***
* **** ** ***** * * ****** *** ******* ** ***
    {
** * ** * **** ***** * * *** ** ** **** * * * * *** ** * t=0;
** * * **** * ** * ** * * * * * **** *******
** * ** ***** ** *** * ** * * ***** * * * ****
*** * ** * * ** * *** ** *** * * ** * ** *** * *** *** ** * * * **** ***** * ***
** **** * * * *** * * * ** ** * * * ****** *** **** * * **
* * **** ** * * ** * ** * * * * * ** * * ** **** * ** * ****** ** * ** ***** ** * *** ** *
* ** ********** * ** * * ** * * ** * * * * *** ** ****
*** * * * ** *** ***** * * * * * ** **
******** * *** * ** * * * ** * ** ** ** ** * * * * ** * && most<input[i])
* ** * ** *** * * ** * * * *** * **
* * * ** ** * ** * * *** *** ** ***** * *** ** * **** * *** *** ***
**** * ** * ** ***** * * * * ** *** *** * *** ******** * * * **** ** * * ******* *** * *
* * ***** * ** ******** ****** ** ** *** ** *
    }
*** * * ** * ** ******* * * * * *
* * * ********** * ** * ****** *
    {
*** * ** * * *** * ** ** **** * * * * * ** ** **** * *
* * *** **** * **** * * * **** ****
* * *** * **** * * ** * ** * **** * * ** * * * ** * ** ** *** **** ** *** **
*** * ***** ** ** * ** ****** * * ** ** * **
    }
** * ** * * *** * *** **
** * * ** *** * *** *** * * *** * * * **** **
    {
** ** ** * ** ** * * * *** * * ** ****** *** *
* * * ******* ******** * * * * * * * *
* * * ** ** * * ** * * * ** * ******* ** ***** * ** * *** * * *
* * *** ** * ***** ** * * ** *** ** ***
    }
    printf("%d %d %d\n",big,small,most);
    return 0;
}
trả lời bởi (131 điểm)
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int arr[1000];
    int i,j, n,count;
    int most=0,mostt=0,big ,small;
* * ** *** * * * * * * ** * ****
** *** * * * **** **** ***** ****
* * * ** ** ****** ** * * * * *** **** * *** ** * **** * * * *
*** ** **** ** ** ** * ** *
    {   
* ** ***** * ** *** * ** * ** **** *
*** * * ******* *** ** **** * ** **** * ****** ** * **
* * ** * ** ** * ** ****** ** * * * ** *
* *** * **** *** ** * ** * * * ** * * * ** **** ** * * * * **
* * * * * ** ** ****** * * * * ******* * *** ** ** **** ** *** **** *** *** * **** **
** * * ****** * * * ** * * * ** * ** * **** ** ** * *******
* * ** * *** *** ** * * ** ** * **** ***** ** ** ** * * * **** *** * * * ** ** && arr[i]>most)
*** **** * * * * **** ***** * * * ** *** * **** * ***** ** * ** *** ** *
* ** ** ** *** *** * *** * * *** ** *** ***** *** * ** ** ** ** ** ** **** * * ** ****** ** * * * *
***** *** * ** * * * * ** * * * ** ** * **** * * ** ** * ** *** **** **** * *** * *** * *
* * * * ** * * * ** ** ** * *** ** *** ** * *** *** * **
* ******* *** * * ***** * ** * *** *** * *
     }
     
*** * ** ** ** *** ** * ** ****** *
* * ** ** * * *** * ** *** * * ***
     {
* *** *** *** * ** ** * * * * * * * * * ****** * ** ** **** *
*** * ** * * ** * * *** *** ***** * * **** * * * *
** * *** * *** ** *** * ** * **** * *
***** * * * ** * *** *** ** *
*** * **** *** *** * ** *** **
* * ** ** ***** ** ** ** ** *** *
     {
** **** **** *********** * ** * * ** * * ** ** ** ***
* * * ** * ** * * ** **** * * ** * * **
***** *** ******* ** * * ** ** *
* **** * *** ** * *** * ****
** * * * * ** **** * * * * *** * * %d %d\n",big,small,most);
      
}
trả lời bởi (172 điểm)
đã sửa bởi
0 0
prog.c: In function 'main':
prog.c:9:16: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'char *' [-Wformat=]
        scanf("%d",&arr[i]);
                ^
0 0
Case 0: Wrong output
0 0
Case 0: Wrong output
0 0
-----------Re-judge-----------
Case 0: Wrong output
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int n, temp, i, j,current num, current numlen;
** * ** ** * * * ***** * ****** *
* * * * * * * ** * **** * *** *
** **** * * ***** * *** *** *** ** ****** *** ***** ** ** ****** *
* * ********* ** * * * ** *****
** * **** * * * *** * * * ***** * * * ** ** ***** * * *** *** * *** * * * * * ** * ** ** * *** * ** * *
* ****** ** * ** *** * * * ***** *** **** ** * * * * *** * ***
* *** * * **** * ** *** ** * * * * * * ** * ** * *** * *
* * * ** ** **** *** * * * * * * * * ** ** * ****** ** *****
**** ** * * * * * * * * * * ***** * * ** * * * * * * * * ** *** * * * *
* ** **** * * * * *** **** ** ** **
    }
    current num=num[0];
    current numlen=0;
* *** * * * * * *** ** ** * ** * * num);
* *** * ** * * ** ** * * * * ** * ** * * *****
* ** *** ** * * * * * ** * * *** ***
* *** ***** ** * * ***** ** * * * * * *
* *** *** * ** * * * * * * * ** ****** * ** ** ** *** ****** * ** numlen++;
** ** * * *** * *** ***** * ** ** * * if(num[i]!=num[i+1])
******* ** **** ** * ** * ** * * ** * *** *** ***** * num=num[i+1];   
    } * * * ** ******* * *
*** * * * * *** * * ** ** * * * * ** * numlen); ** ** * **** * * *** ** * *
***** * **** * * ** ** *** * ***
    return 0;
}
trả lời bởi (144 điểm)
0 0
prog.c: In function 'main':
prog.c:4:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'num'
     int n, temp, i, j,current num, current numlen;
                               ^~~
prog.c:7:20: error: 'num' undeclared (first use in this function)
        scanf("%d",&num[i]);
                    ^~~
prog.c:7:20: note: each undeclared identifier is reported only once for each function it appears in
prog.c:9:25: error: expected ';' before ')' token
        for(j=i+1,j<n;j++){
                         ^
prog.c:16:5: error: unknown type name 'current'
     current num=num[0];
     ^~~~~~~
prog.c:16:20: error: subscripted value is neither array nor pointer nor vector
     current num=num[0];
                    ^
prog.c:17:5: error: unknown type name 'current'
     current numlen=0;
     ^~~~~~~
prog.c:18:17: error: 'current' undeclared (first use in this function)
     printf("%d",current num);
                 ^~~~~~~
prog.c:18:25: error: expected ')' before 'num'
     printf("%d",current num);
                         ^~~
prog.c:19:20: error: subscripted value is neither array nor pointer nor vector
     printf("%d",num[n-1]);
                    ^
prog.c:21:14: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
              ^
prog.c:21:22: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
                      ^
prog.c:22:19: error: expected ';' before 'numlen'
           current numlen++;
                   ^~~~~~
prog.c:23:19: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                   ^
prog.c:23:27: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                           ^
prog.c:24:19: error: expected ';' before 'num'
           current num=num[i+1];
                   ^~~
prog.c:26:25: error: expected ')' before 'numlen'
     printf("%d",current numlen);
                         ^~~~~~
0 0
prog.c: In function 'main':
prog.c:4:31: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'num'
     int n, temp, i, j,current num, current numlen;
                               ^~~
prog.c:7:20: error: 'num' undeclared (first use in this function)
        scanf("%d",&num[i]);
                    ^~~
prog.c:7:20: note: each undeclared identifier is reported only once for each function it appears in
prog.c:9:25: error: expected ';' before ')' token
        for(j=i+1,j<n;j++){
                         ^
prog.c:16:5: error: unknown type name 'current'
     current num=num[0];
     ^~~~~~~
prog.c:16:20: error: subscripted value is neither array nor pointer nor vector
     current num=num[0];
                    ^
prog.c:17:5: error: unknown type name 'current'
     current numlen=0;
     ^~~~~~~
prog.c:18:17: error: 'current' undeclared (first use in this function)
     printf("%d",current num);
                 ^~~~~~~
prog.c:18:25: error: expected ')' before 'num'
     printf("%d",current num);
                         ^~~
prog.c:19:20: error: subscripted value is neither array nor pointer nor vector
     printf("%d",num[n-1]);
                    ^
prog.c:21:14: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
              ^
prog.c:21:22: error: subscripted value is neither array nor pointer nor vector
        if(num[i]==num[i+1])
                      ^
prog.c:22:19: error: expected ';' before 'numlen'
           current numlen++;
                   ^~~~~~
prog.c:23:19: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                   ^
prog.c:23:27: error: subscripted value is neither array nor pointer nor vector
        else if(num[i]!=num[i+1])
                           ^
prog.c:24:19: error: expected ';' before 'num'
           current num=num[i+1];
                   ^~~
prog.c:26:25: error: expected ')' before 'numlen'
     printf("%d",current numlen);
                         ^~~~~~
0 thích 0 k thích
Hidden content!
#include<stdio.h>
int main()
{
    int x,max=0,min=0,size=0;
*** * * ** **** ***** ** * * ** * ** * ***
* ** ** ***** **** * * arr[x],amount[x];
** * * **** *** *** ** * * i;
* ** * * * *** ** ** * * ***
* ** * * * *** ****** * * * ****** *** * * * * **** * *** ** *** *** *
** ** ** **** ** ** *** * **
    int j;
* *** ** *** ******** * * ** ** * * **
    {
**** ** ** *** * * **** ***** **** *** *** ***** ** ** * *
* ** *** * **** * ***** * * *** **** * ** ****** * * * *** * * **
* * * ** * *** * * * * *** * * * ** ****
* ** * **** ** *** ***** *** ** ** * * * * * ***** * * **** *** **** ** *
    }
* ** *** ** * * ** * * *
    {
* ** * *** * ** **** ** ** *** * ******* ** * *
** *** ** ** * * *** ******* ** *** **
**** * ** ** * *** ** *** * * ** * *** * ** ** ** ******* * ** ** **
*** ** ** ** ** ** ** * ** * ** ** ** *** * * **** ** * * ** *** ** * * * ******
* * *** *** ****** * ** ** ** * * **
    }
    int temp=0;
* ** * *** ** * ***** * **
    {
* *** ** *** ** ** ** *** * *** ** * * * ** ****** * **** * ***** * * ** *** ** *** *
* * *** ***** * * * * * *** * ** * *
**** *** ** * * ** **** ****** ***** ** ** * **** * * ***** ** * * ** *
*** * * * *** * * **** ***** ** * ** * **** * *** * ***** ** *
** **** * * ** ** **** ** ** * ***
    }
***** ** * ****** * ** * ** * %d %d\n",max,min,arr[size]);
*** * * * **** ***** * * *** 0;
}
trả lời bởi (196 điểm)
đã sửa bởi
0 0
Case 0: Wrong output
0 0
prog.c: In function 'main':
prog.c:9:16: warning: format '%d' expects argument of type 'int *', but argument 2 has type 'char *' [-Wformat=]
        scanf("%d",&arr[i]);
                ^
0 0
Case 0: Correct output
0 0
-----------Re-judge-----------
Case 0: Wrong output
Welcome to Peer-Interaction Programming Learning System (PIPLS) LTLab, National DongHwa University
English 中文 Tiếng Việt
IP:172.70.80.38
©2016-2025

Những câu hỏi liên quan

2 thích 0 k thích
5 trả lời
[Exam] đã hỏi ngày 23 tháng 12 năm 2017 trong 2017-1 程式設計(一)AD bởi 楊修俊 (30k điểm)
ID: 38942 - Xem được từ: 2017-12-23 09:00 - Hiệu lực đến: 2017-12-23 12:10
| 2.2k đã xem
2 thích 0 k thích
18 trả lời
[Exam] đã hỏi ngày 23 tháng 12 năm 2017 trong 2017-1 程式設計(一)AD bởi 楊修俊 (30k điểm)
ID: 38941 - Xem được từ: 2017-12-23 09:00 - Hiệu lực đến: 2017-12-23 12:10
| 6k đã xem
3 thích 0 k thích
16 trả lời
[Exam] đã hỏi ngày 23 tháng 12 năm 2017 trong 2017-1 程式設計(一)AD bởi 楊修俊 (30k điểm)
ID: 38939 - Xem được từ: 2017-12-23 09:00 - Hiệu lực đến: 2017-12-23 12:10
| 6.4k đã xem
3 thích 0 k thích
12 trả lời
[Exam] đã hỏi ngày 23 tháng 12 năm 2017 trong 2017-1 程式設計(一)AD bởi 楊修俊 (30k điểm)
ID: 38938 - Xem được từ: 2017-12-23 09:00 - Hiệu lực đến: 2017-12-23 12:10
| 4.5k đã xem
2 thích 0 k thích
3 trả lời
[Normal] Coding (C) - đã hỏi ngày 20 tháng 12 năm 2017 trong 2017-1 程式設計(一)AD bởi 楊修俊 (30k điểm)
ID: 38168 - Xem được từ: Không giới hạn - Hiệu lực đến: Không giới hạn
| 1.3k đã xem
12,783 câu hỏi
183,442 trả lời
172,219 bình luận
4,824 thành viên